Helix 6 Falkor carbon fiber barrel – 6.5 Creedmoor Hunter contour pre-fit rifle barrel

Falkor Pre-Fit Carbon Fiber Barrel

$1,099.99
Built to Order – Estimated 6 Week Lead Time

Most products have an estimated lead time of 6 weeks. Common offerings, such as 6.5mm and .30 caliber, will often ship sooner, while less common or large-bore offerings may require additional time, in some cases up to 90 days.

Lead times vary with demand, but our goal is always to keep them as short as possible. Every barrel is built to order by skilled American craftsmen, taking the time to build a premium product that performs to the highest standards.

Helix 6 Installation Service
If you choose Helix 6 installation below, our team will help coordinate sending your action to us for installation.

Questions? Contact us at info@helix6precision.com .

Current Stock:
Adding to cart… The item has been added
Description

Falkor Pre-Fit Carbon Fiber Barrels

Helix 6 Precision carbon fiber pre-fit barrels for Falkor 7EVEN SA, 7EVEN LA, LW7 SA, and LW7 LA actions are built for precision shooters and custom rifle builders who demand accuracy, consistency, and straightforward installation. Each barrel is precision chambered and threaded for direct fitment to the specified action, eliminating the need for traditional gunsmith fitting.

Built around a match-grade 416R stainless steel core, each barrel is button-rifled and hand-lapped, then wrapped using our proprietary high-carbon, low-resin carbon fiber process. The result is a stiff, thermally stable barrel designed to minimize point-of-impact shift during extended strings of fire.

Each Helix 6 barrel carries a sub-½ MOA accuracy guarantee when used with match-grade ammunition, quality components, and by a capable shooter.

This pre-fit barrel is compatible with the following actions:

Falkor 7EVEN SA, 7EVEN LA, LW7 SA, and LW7 LA

Key Features

  • Pre-Fit for Falkor 7EVEN SA, 7EVEN LA, LW7 SA & LW7 LA – Precision chambered and threaded for direct installation.
  • Match-Grade 416R Stainless Steel Core – Button-rifled and hand-lapped for consistent performance.
  • High-Carbon, Low-Resin Carbon Fiber – Designed for stiffness and thermal stability.
  • Hand-Lapped Bore – Provides a smooth, consistent bore finish.
  • Minimal POI Shift – Proprietary carbon fiber construction helps maintain point of impact during extended strings of fire.
  • Sub-½ MOA Accuracy Guarantee – When used with match-grade ammunition, quality components, and by a capable shooter.
  • Muzzle Thread – 5/8-24

Bolt Face Disclaimer

Cartridge compatibility is dependent on the bolt face of your specific action. Please verify that your action has the correct bolt face for the cartridge selected before ordering. Helix 6 Precision does not modify or change the bolt face on Falkor actions.

Specifications

Cartridge Length Twist Approx. Weight
22 Creedmoor 24" 1:8 2 lbs 15 oz
6mm Creedmoor 24" 1:8 2 lbs 15 oz
25 Creedmoor 24" 1:7 2 lbs 14 oz
6.5 Creedmoor 22" 1:8 2 lbs 11 oz
6.5 Creedmoor 24" 1:8 2 lbs 14 oz
6.5 PRC 22" 1:8 2 lbs 11 oz
6.5 PRC 24" 1:8 2 lbs 14 oz
7mm Backcountry 20" 1:8 2 lbs 7 oz
7mm PRC 24" 1:8 2 lbs 12 oz
308 Win 18" 1:10 2 lbs 4 oz
308 Win 20" 1:10 2 lbs 7 oz
300 Win Mag 24" 1:10 2 lbs 11 oz
300 PRC 24" 1:8 2 lbs 11 oz

Weights are approximate. As a general guideline, each additional 1" of barrel length adds approximately 1.5 oz of weight. Actual weight may vary slightly due to manufacturing tolerances, contour, and final machining.

Government Export Restriction

This item may be regulated for export by the U.S. Department of State or U.S. Department of Commerce. Please see our Export Policy prior to placing your order.

Government Restriction

By adding this item to your cart, you understand and agree to the Domestic Restricted Product Policy and certify that you will comply with all applicable federal, state, and local laws and regulations.